Notice: Users may be experiencing issues with displaying some pages on stanfordhealthcare.org. We are working closely with our technical teams to resolve the issue as quickly as possible. Thank you for your patience.
 

Learn about the flu shot, COVID-19 vaccine, and our masking policy »

Stanford Health Care

Radio-luminescent imaging for rapid, high resolution eye plaque loading verification. Medical physics Yan, H., De Jean, P., Grafil, E., Ashraf, R., Niedermayr, T., Astrahan, M., Mruthyunjaya, P., Beadle, B., Xing, L., Liu, W. 2022

Abstract

BACKGROUND: Eye plaque brachytherapy (EPB) is currently an optimal therapy for intraocular cancers. Due to the lack of an effective and practical technique to measure the seed radioactivity distribution, current quality assurance (QA) practice according to the AAPM TG129 only stipulates that the plaque assembly be visually inspected. Consequently, uniform seed activity is routinely adopted to avoid possible loading mistakes of differential seed loading. However, modulated dose delivery, which represents a general trend in radiotherapy to provide more personalized treatment for a given tumor and patient, requires differential activities in the loaded seeds.PURPOSE: In this study, a fast and low-cost radio-luminescent imaging and dose calculating system to verify the seed activity distribution for differential loading was developed.METHODS: A proof-of-concept system consisting of a thin scintillator sheet coupled to a camera/lens system was constructed. A seed-loaded plaque can be placed directly on the scintillator surface with the radioactive seeds facing the scintillator. The camera system collects the radioluminescent signal generated by the scintillator at its opposite side. The predicted dose distribution in the scintillator's sensitive layer was calculated using a Monte Carlo simulation with the planned plaque loading pattern of I-125 seeds. Quantitative comparisons of the distribution of relative measured signal intensity and that of the relative predicted dose in the sensitive layer were performed by gamma analysis, similar to IMRT QA.RESULTS: Data analyses showed high gamma (3%/0.3mm, global, 20% threshold) passing rates for correct seed loadings and low passing rates with distinguished high gamma value area for incorrect loadings, indicating that possible errors may be detected. The measurement and analysis only required a few extra minutes, significantly shorter than the time to assay the extra verification seeds the physicist already must perform as recommended by TG129.CONCLUSIONS: Radio-luminescent QA can be used to facilitate and assure the implementation of intensity modulated, customized plaque loading. This article is protected by copyright. All rights reserved.

View details for DOI 10.1002/mp.16003

View details for PubMedID 36183146